جستجو در تالارهای گفتگو
در حال نمایش نتایج برای برچسب های 'memory'.
2 نتیجه پیدا شد
-
STK200 schematics family such as a 74FHC573 if you go beyond 4 MHz. You can also program an extra wait state, to use slower memory. Here you will find a pdf file showing the STK200 schematics: [Hidden Content] If you use a 32 KB SRAM, then connect the /CS signal to A15 which give to the range of &H0000 to &H7FFF, if you use a 64 KB SRAM, then tie /CS to GND, so the RAM is selected all the time. from : BASCOM AVR (MCS Electronic)
-
The AVR chips all have internal hardware that can be used. For this description of the hardware the 90S8515 was used. Newer chips like the Mega8515 may differ and have more or less internal hardware. You will need to read the manufacturers data sheet for the processor you are using to learn about the special internal hardware available. Timer / Counters The AT90S8515 provides two general purpose Timer/Counters – one 8-bit T/C and one 16-bit T/C. The Timer/Counters have individual pre-scaling selection from the same 10-bit pre-scaling timer. Both Timer/Counters can either be used as a timer with an internal clock time base or as a counter with an external pin connection which triggers the counting. timer-counter prescaler
