رفتن به مطلب

Breathalyzer


mani24

ارسال های توصیه شده

 

A breathalyzer (U.S.A.) or breathalyser (U.K.) (a portmanteau of breath and analyzer/analyser) is a device for estimating

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
alcohol content (BAC) from a breath sample. Breathalyzer is the brand name of a series of models made by one manufacturer of these instruments (originally Smith and Wesson,[1] later sold to National Draeger), but has become a genericized trademark for all such instruments.[citation needed] In Canada, a preliminary non-evidentiary screening device can be approved by Parliament as an approved screening device, and an evidentiary breath instrument can be similarly designated as an approved instrument. The U.S. National Highway
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
Safety Administration maintains a Conforming Products List of breath alcohol devices approved for evidentiary use,[2] as well as for preliminary screening use

 

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.

 

Origins

 

A 1927 paper produced by Emil Bogen,[4] who collected air in a football match and then tested this air for traces of alcohol, discovered that the alcohol content of 2 litres of expired air was a little greater than that of 1 cc of

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
. However, research into the possibilities of using breath to test for alcohol in a person's
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
dates as far back as 1874, when Anstie made the observation that small amounts of alcohol were excreted in breath.[5]

 

The first practical roadside breath-testing device intended for use by the police was the drunkometer. The drunkometer was developed by Professor Harger in 1938. The drunkometer collected a motorist's breath sample directly into a balloon inside the machine. The breath sample was then pumped through an acidified potassium permanganate

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
. If there was alcohol in the breath sample, the
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
changed colour. The greater the colour change, the more alcohol there was present in the breath.

 

In late 1927, in a case in Marlborough, England, a Dr. Gorsky, Police Surgeon, asked a suspect to inflate a football

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
with his breath. Since the 2 liters of the man's breath contained 1.5 ml of ethanol[dubious – discuss], Dr. Gorsky testified before the court that the defendant was "50% drunk".[6] Though technologies for detecting alcohol vary, it is widely accepted that Dr. Robert Borkenstein (1912–2002), a captain with the Indiana State Police and later a professor at Indiana University at Bloomington, is regarded as the first to create a device that measures a subject's
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
alcohol level based on a breath sample. In 1954, Borkenstein invented his breathalyzer, which used chemical oxidation and photometry to determine alcohol concentration. Subsequent breathalyzers have converted primarily to infrared spectroscopy. The invention of the breathalyzer provided law enforcement with a non-invasive test providing immediate results to determine an individual's breath alcohol concentration at the time of testing. Also, the breath alcohol concentration test result itself can vary between individuals consuming identical amounts of alcohol due to gender,
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
, and genetic pre-disposition.

 

 

Chemistry

 

When the user exhales into the breathalyzer, any ethanol present in their breath is oxidized to

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
at the anode:

 

CH3CH2OH(g) + H2O(l) → CH3CO2H(l) + 4H+(aq) + 4e-

At the cathode, atmospheric oxygen is reducedanesh_4.gif

 

O2(g) + 4H+(aq) + 4e- → 2H2O(l)

 

The overall reaction is the oxidation of ethanol to

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
and water.

 

CH3CH2OH(l) + O2(g) → CH3COOH(l) + H2O(l)

The electrical current produced by this reaction is measured, processed, and displayed as an approximation of overall

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
alcohol content by the breathalyzer

 

Law enforcement

 

Breath analyzers do not directly measure

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
alcohol content or concentration, which requires the analysis of a
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
sample. Instead, they estimate BAC indirectly by measuring the amount of alcohol in one's breath. Two breathalyzer technologies are most prevalent. Desktop analyzers generally use infrared spectrophotometer technology, electrochemical fuel
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
technology, or a combination of the two. Hand-held field testing devices are generally based on electrochemical platinum fuel
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
analysis and, depending upon jurisdiction, may be used by officers in the field as a form of "field sobriety test" commonly called PBT (preliminary breath test) or PAS (preliminary alcohol screening) or as evidential devices in POA (point of
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
) testing

 

 

Consumer use

 

There are many models of consumer or personal breath alcohol testers on the market. These hand-held devices are generally less expensive than the devices used by law enforcement. Most retail consumer breath testers use

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
-based sensing technology, which is less expensive, less accurate, and less reliable than fuel
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
and infrared devices.

 

All breath alcohol testers sold to consumers in the United States are required to be certified by the Food and Drug Administration,[7] while those used by law enforcement must be approved by the Department of Transportation's National Highway

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
Safety Administration.[8]

 

Manufacturers of over-the-counter consumer breathalyzers must submit an FDA 510(k) Premarket

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
to demonstrate that the device to be marketed is at least as safe and effective, that is, substantially equivalent, to a legally marketed device (21 CFR 807.92(a) (3)) that is not subject to Premarket Approval (PMA). Submitters must compare their device to one or more similar legally marketed devices and make and
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
their substantial equivalency claims.[9] The devices are cleared as "screeners" which means they have met the requirements used by the FDA for detecting the presence of alcohol in the breath. Screener certification does not mean that the device can measure breath alcohol content accurately. Many breathalyzers cleared by the FDA are very inaccurate when it comes to BAC measurement. No
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
device has ever been approved for evidential use (to stand-up in a court of law) by any State Law Enforcement Agencies or the U.S. Department of Transportation

 

 

Common sources of error

 

Breath testers can be very sensitive to

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
, for example, and will give false readings if not adjusted or recalibrated to account for ambient or surrounding air temperatures. The
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
of the subject is also very important.[citation needed]

 

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
pattern can also significantly affect breath test results. One study found that the BAC readings of subjects decreased 11–14% after running up one flight of stairs and 22–25% after doing so twice. Another study found a 15% decrease in BAC readings after vigorous exercise or hyperventilation. Hyperventilation for 20 seconds has been shown to lower the reading by approximately 32%. On the other hand, holding one's breath for 30 seconds can increase the breath test result by about 28%.[citation needed]

 

Some breath analysis machines assume a hematocrit (cell

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
of
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
) of 47%. However, hematocrit values range from 42 to 52% in men and from 37 to 47% in women. A person with a lower hematocrit will have a falsely high BAC reading.

 

Research indicates that breath tests can vary at least 15% from actual

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
alcohol concentration. An estimated 23% of individuals tested will have a BAC reading higher than their true BAC. Police in Victoria, Australia, use breathalyzers that give a recognized 20% tolerance on readings. Noel Ashby, former Victoria Police Assistant Commissioner (Traffic & Transport), claims that this tolerance is to allow for different
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
types

CalibrationMany handheld breathalyzers sold to consumers use a silicon oxide sensor (also called a

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
sensor) to determine the
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
alcohol concentration. These sensors are far more prone to contamination and
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
from substances other than breath alcohol. The sensors require recalibration or replacement every six months. Higher end personal breathalyzers and professional-use breath alcohol testers use platinum fuel
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
sensors. These too require recalibration but at less frequent intervals than
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
devices, usually once a year.

 

Calibration

 

is the process of checking and adjusting the internal settings of a breathalyzer by comparing and adjusting its test results to a known alcohol standard. Law enforcement breathalyzers are meticulously maintained and re-calibrated frequently to ensure accuracy.

 

There are two methods of calibrating a precision fuel

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
breathalyzer, the Wet Bath and the Dry Gas method. Each method requires specialized
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
and factory trained technicians. It is not a procedure that can be conducted by untrained users or without the proper
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
.

 

The Dry-Gas Method utilizes a portable calibration standard which is a precise mixture of alcohol and inert nitrogen available in a pressurized canister. Initial

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
costs are less than alternative methods and the steps required are fewer. The
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
is also portable allowing calibrations to be done when and where required.

 

The Wet Bath Method utilizes an alcohol/water standard in a precise specialized alcohol concentration, contained and delivered in specialized simulator

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
. Wet bath apparatus has a higher initial cost and is not intended to be portable. The standard must be fresh and replaced regularly.

 

Some

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
models are designed to allow the sensor module to be replaced without the need to send the unit to a calibration lab

 

 

Non-specific analysis

 

One major problem with older breathalyzers is non-specificity: the machines not only identify the ethyl alcohol (or ethanol) found in alcoholic beverages, but also other substances similar in molecular

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
or reactivity.

 

The oldest breathalyzer models pass breath through a

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
of potassium dichromate, which oxidizes ethanol into
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
, changing color in the process. A monochromatic light beam is passed through this sample, and a
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
records the change in intensity and, hence, the change in color, which is used to calculate the percent alcohol in the breath. However, since potassium dichromate is a strong oxidizer, numerous alcohol groups can be oxidized by it, producing false positives. This source of false positives is unlikely as very few other substances found in exhaled air are oxidizable.

 

Infrared-based breathalyzers project an infrared beam of

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
through the captured breath in the sample chamber and detect the absorbance of the compound as a
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
of the
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
of the beam, producing an absorbance
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
that can be used to identify the compound, as the absorbance is due to the harmonic
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
and stretching of specific bonds in the molecule at specific wavelengths (see infrared spectroscopy). The characteristic bond of alcohols in infrared is the O-H bond, which gives a strong absorbance at a short
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
. The more light is absorbed by compounds containing the alcohol group, the less reaches the
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
on the other side—and the higher the reading. Other groups, most notably aromatic rings and carboxylic acids can give similar absorbance readings.[12] Even water vapor does.

 

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.

 

 

Interfering compounds

 

Some natural and volatile interfering compounds do exist, however. For example, the National Highway

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
Safety Administration (NHTSA) has found that dieters and diabetics may have acetone levels hundreds or even thousand of times higher than those in others. Acetone is one of the many substances that can be falsely identified as ethyl alcohol by some breath machines. However, fuel
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
based systems are non-responsive to substances like acetone.

 

A study in Spain showed that metered-dose inhalers (MDIs) used in

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
treatment are also a cause of false positives in breath machines.

 

Substances in the environment can also

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
to false BAC readings. For example, methyl tert-butyl ether (MTBE), a common gasoline additive, has been alleged anecdotally to cause false positives in persons exposed to it. Tests have shown this to be true for older machines; however, newer machines detect this
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
and compensate for it.[13] Any number of other products found in the environment or workplace can also cause erroneous BAC results. These include compounds found in lacquer, paint remover, celluloid, gasoline, and cleaning fluids, especially ethers, alcohols, and other volatile compounds.

 

Homeostatic variables

 

Breathalyzers assume that the subject being tested has a 2100-to-1 partition ratio[14] in converting alcohol measured in the breath to estimates of alcohol in the

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
. If the instrument estimates the BAC, then it measures
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
of alcohol to
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
of breath, so it will effectively measure grams of alcohol per 2100 ml of breath given. This measure is in direct proportion to the amount of grams of alcohol to every 1 ml of
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
. Therefore, there is a 2100-to-1 ratio of alcohol in
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
to alcohol in breath. However, this assumed partition ratio varies from 1300:1 to 3100:1 or wider among individuals and within a given individual over time. Assuming a true (and US legal)
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
-alcohol concentration of .07%, for example, a person with a partition ratio of 1500:1 would have a breath test reading of .10%—over the legal limit.

 

Most individuals do, in fact, have a 2100-to-1 partition ratio in accordance with William Henry's law, which states that when the water

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
of a volatile compound is brought into
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
with air, there is a fixed ratio between the concentration of the compound in air and its concentration in water. This ratio is constant at a given
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
. The human
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
is 37 degrees Celsius on average. Breath leaves the mouth at a
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
of 34 degrees Celsius. Alcohol in the
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
obeys Henry's Law as it is a volatile compound and diffuses in
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
water. To ensure that variables such as fever and hypothermia could not be pointed out to influence the results in a way that was harmful to the accused, the instrument is calibrated at a ratio of 2100:1, underestimating by 9 percent. In order for a person running a fever to significantly overestimate, he would have to have a fever that would likely see the subject in the hospital rather than driving in the first place. Studies suggest that about 1.8% of the population have a partition ratio below 2100:1. Thus, a machine using a 2100-to-1 ratio could actually overestimate the BAC. As much as 14% of the population has a partition ratio above 2100, thus causing the machine to under-report the BAC.

 

Further, the assumption that the test subject's partition ratio will be average—that there will be 2100 parts in the

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
for every
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
in the breath—means that accurate analysis of a given individual's
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
alcohol by measuring breath alcohol is difficult, as the ratio varies considerably.

 

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
in how much one breathes out can also give false readings, usually low.[15] This is due to biological
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
in breath alcohol concentration as a
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
of the
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
of air in the lungs, an example of a factor which interferes with the liquid-gas
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
assumed by the devices. The presence of volatile components is another example of this; mixtures of volatile compounds can be more volatile than their components, which can create artificially high levels of ethanol (or other) vapors relative to the normal biological
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
/breath alcohol
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
.

 

Mouth alcohol

 

One of the most common causes of falsely high breathalyzer readings is the existence of mouth alcohol. In analyzing a subject's breath sample, the breathalyzer's internal computer is making the assumption that the alcohol in the breath sample came from alveolar air—that is, air exhaled from deep within the lungs. However, alcohol may have come from the mouth, throat or stomach for a number of reasons. To help guard against mouth-alcohol contamination, certified breath-test operators are trained to observe a test subject carefully for at least 15–20 minutes before administering the test.

 

The problem with mouth alcohol being analyzed by the breathalyzer is that it was not absorbed through the stomach and intestines and passed through the

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
to the lungs. In other words, the machine's computer is mistakenly applying the partition ratio (see above) and multiplying the result. Consequently, a very tiny amount of alcohol from the mouth, throat or stomach can have a significant
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
on the breath-alcohol reading.

 

Other than recent drinking, the most common source of mouth alcohol is from belching or burping. This causes the liquids and/or gases from the stomach—including any alcohol—to rise up into the soft tissue of the esophagus and oral

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
, where it will stay until it has dissipated. The American Medical Association concludes in its Manual for Chemical Tests for Intoxication (1959): "True reactions with alcohol in expired breath from sources other than the alveolar air (eructation, regurgitation, vomiting) will, of course, vitiate the breath alcohol results." For this reason, police officers are supposed to keep a DUI suspect under observation for at least 15 minutes prior to administering a breath test. Instruments such as the Intoxilyzer 5000 also feature a "slope" parameter. This parameter detects any decrease in alcohol concentration of 0.006 g per 210 L of breath in 0.6 second, a condition indicative of residual mouth alcohol, and will result in an "invalid sample" warning to the operator, notifying the operator of the presence of the residual mouth alcohol. PBT's, however, feature no such safeguard.

 

Acid reflux, or gastroesophageal reflux disease, can greatly exacerbate the mouth-alcohol problem. The stomach is normally

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
from the throat by a
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
, but when this
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
becomes herniated, there is nothing to stop the liquid contents in the stomach from rising and permeating the esophagus and mouth. The contents—including any alcohol—are then later exhaled into the breathalyzer.[16]

 

Mouth alcohol can also be created in other ways. Dentures, for example, will trap alcohol. Periodontal disease can also create pockets in the gums which will contain the alcohol for longer periods. Also known to produce false results due to residual alcohol in the mouth is passionate kissing with an intoxicated person. Recent use of mouthwash or breath freshener—possibly to disguise the smell of alcohol when being pulled over by police—contain fairly high levels of alcohol.

 

Testing during absorptive phase

 

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
of alcohol continues for anywhere from 20 minutes (on an empty stomach) to two-and-one-half hours (on a full stomach) after the last consumption. Peak
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
generally occurs within an hour. During the initial absorptive phase, the
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
of alcohol throughout the
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
is not uniform. Uniformity of
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
, called
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
, occurs just as
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
completes. In other words, some parts of the
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
will have a higher
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
alcohol content (BAC) than others. One aspect of the non-uniformity before
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
is complete is that the BAC in arterial
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
will be higher than in venous
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
. Laws generally require
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
samples to be venous.

 

During the initial

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
phase, arterial
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
alcohol concentrations are higher than venous. After
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
, venous
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
is higher. This is especially true with bolus
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
. With additional doses of alcohol, the
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
can reach a sustained
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
when
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
and elimination are proportional, calculating a general
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
of 0.02/drink and a general elimination
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
of 0.015/hour. (One drink is equal to 1.5 ounces of liquor, 12 ounces of beer, or 5 ounces of wine.[17])

 

Breath alcohol is a

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
of the
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
of alcohol concentration as the
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
gases (alcohol) pass from the (arterial)
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
into the lungs to be expired in the breath. The venous
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
picks up oxygen for
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
throughout the
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
. Breath alcohol concentrations are generally lower than
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
alcohol concentrations, because a true
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
of
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
alcohol concentration is only possible if the lungs were able to completely deflate. Vitreous (eye)
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
provides the most accurate account of
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
alcohol concentrations.

 

Retrograde extrapolation

 

The breathalyzer test is usually administered at a police station, commonly an hour or more after the

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
. Although this gives the BrAC at the time of the test, it does not by itself answer the question of what it was at the time of driving. The prosecution typically provides an estimated alcohol concentration at the time of driving utilizing retrograde extrapolation, presented by expert opinion. This involves projecting back in time to estimate the BrAC level at the time of driving, by applying the physiological properties of
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
and elimination rates in the human
برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
.

 

Extrapolation is calculated using five factors and a general elimination

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
of 0.015/hour.

 

For example: Time of breath test-10:00pm...Result of breath test-0.080...Time of driving-9:00pm (stopped by officer)...Time of last drink-8:00pm...Last food-12:00pm

 

Using these facts, an expert can say the person's last drink was consumed on an empty stomach, which means

برای مشاهده این محتوا لطفاً ثبت نام کنید یا وارد شوید.
of the last drink (at 8:00) was complete within one hour-9:00. At the time of the stop, the driver is fully absorbed. The test result of 0.080 was at 10:00. So the one hour of elimination that has occurred since the stop is added in, making 0.080+0.015=0.095 the approximate breath

لینک به دیدگاه

به گفتگو بپیوندید

هم اکنون می توانید مطلب خود را ارسال نمایید و بعداً ثبت نام کنید. اگر حساب کاربری دارید، برای ارسال با حساب کاربری خود اکنون وارد شوید .

مهمان
ارسال پاسخ به این موضوع ...

×   شما در حال چسباندن محتوایی با قالب بندی هستید.   حذف قالب بندی

  تنها استفاده از 75 اموجی مجاز می باشد.

×   لینک شما به صورت اتوماتیک جای گذاری شد.   نمایش به صورت لینک

×   محتوای قبلی شما بازگردانی شد.   پاک کردن محتوای ویرایشگر

×   شما مستقیما نمی توانید تصویر خود را قرار دهید. یا آن را اینجا بارگذاری کنید یا از یک URL قرار دهید.

×
×
  • اضافه کردن...